Bimetal Trap
Technical Parameter
Product model: CS47H
Nominal diameter: DN15~50mm
Nominal pressure: PN1.6MPa
Working temperature: ≤ 350 ℃
Main materials: forged steel, stainless steel, titanium alloy steel, chromium molybdenum steel, low-temperature steel
Drive mode: manual
The operating principle of the adjustable bimetal trap is that the
bimetal temperature sensing element drives the valve core to open and
close the valve. When the device is just started, low-temperature
condensate appears in the pipe, the bimetal is flattened, and the spool
is in the open position under the spring force. When the condensate
temperature gradually increases, the bimetal temperature sensing element
begins to bend and deform, and pushes the valve core to the closed
position. The trap closes completely before the condensate reaches
saturation temperature. There is always high-temperature condensate in
front of the valve, no steam leakage, and the energy-saving effect is
good.
Features and performance：
1. New SCCV closing system design, reliable closing and long service life.
2.
The discharge temperature can be adjusted, and the sensible heat in the
high-temperature condensed water can be effectively used, and the
energy-saving effect is remarkable.
3. The discharge temperature can be measured when the pipe network is running, and it can be installed at any angle.
4. There is always high-temperature condensed water in front of the valve, forming a reliable water seal without steam leakage.
5. Anti-water hammer, excellent air exhaust performance.
6. There is no noise during operation, which is beneficial to protect the environment.
7.
At the beginning of steam ventilation, all valves are opened, and
low-temperature condensed water and air are quickly removed.
Significantly reduces device startup time.
8. The internal parts are all made of stainless steel, which is anti-corrosion and cavitation.
